Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle
  • Load image into Gallery viewer, Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle

Tronex 5004 Angulated 50° Large Taper Flush Cutter – Standard Handle

$109.07
$109.07
$109.07
Sold out
Shipping calculated at checkout.

  • The Tronex 5004 Angulated 50° Large Taper Flush Cutter is engineered for precision cutting in applications where access is limited and accuracy is critical. Its 50° angulated large taper head allows you to reach into crowded assemblies and confined spaces with ease, while the short jaw and pointed tip provide exceptional control for detailed cutting tasks.

    Manufactured from premium 62–63 HRC carbon steel, the 5004 delivers long-lasting cutting performance and clean flush cuts on soft copper wire. The ESD-safe double-sheathed cushion grips provide comfort during extended use while protecting sensitive electronic components from electrostatic discharge. Whether you're assembling circuit boards, trimming component leads, or performing precision jewelry work, the Tronex 5004 is built for professional results.

    Features & Benefits

    • 50° angulated large taper head for superior access in tight spaces
    • Flush cutting edges produce clean, precise cuts with minimal protrusion
    • Short jaw and pointed tip for enhanced visibility and control
    • Precision-ground cutting edges for consistent performance
    • Hardened carbon steel construction (62–63 HRC) for durability
    • Relief head profile improves access around components
    • ESD-safe double-sheathed cushion grips for comfort and static protection
    • Ideal for electronics assembly, PCB work, wire trimming, and precision manufacturing

    Specifications

    • Brand: Tronex
    • Model: 5004
    • Tool Type: Angulated Flush Cutter
    • Head Shape: 50° Large Taper Head
    • Profile: Relief
    • Material: Carbon Steel
    • Material Hardness: 62–63 HRC
    • Cut Type: Flush
    • Cutting Capacity: 0.008"–0.031" (0.2–0.8 mm)
    • Wire Capacity: 32–20 AWG (Soft Copper Wire)
    • Overall Length: 4.7" (119 mm)
    • Handle Length: Standard
    • Handle Type: Double-Sheathed Cushion Grip, ESD Safe
    • RTT Resistance: <1 × 10¹¹ ohms (ANSI/ESD STM11.13)

    Ideal For

    • Electronics manufacturing
    • PCB assembly and rework
    • Trimming component leads
    • Precision wire cutting
    • Aerospace and medical device assembly
    • Jewelry making
    • Fine mechanical assembly
    • Laboratory and cleanroom environments

    Frequently Asked Questions

    What is the advantage of the 50° angled head?
    The 50° angulated head provides improved access when working in confined or crowded assemblies, making it easier to reach component leads and wires that are difficult to access with straight cutters.

    What materials can the Tronex 5004 cut?
    The 5004 is designed for cutting soft copper wire from 0.008" to 0.031" (0.2–0.8 mm), or 32–20 AWG. Using the cutter on harder materials or larger wire can damage the cutting edges.

    What does a flush cut mean?
    A flush cut leaves very little material protruding after cutting, producing a clean finish that's ideal for trimming component leads and fine wire in electronics and precision assembly.

    Are the handles ESD safe?
    Yes. The double-sheathed cushion grips are ESD safe and tested to ANSI/ESD STM11.13 standards, helping protect static-sensitive electronic components.

    Who should use the Tronex 5004?
    The 5004 is ideal for electronics technicians, PCB assemblers, aerospace manufacturers, jewelers, and anyone performing precision cutting where access and clean flush cuts are essential.

Please visit our "Selecting a Cutter" guide to help in the selection of the right cutter.