Professional Chainmaille & Jump Ring Pliers for Better Control, Leverage, and Precision

The Tronex P547 and P747 Flat Nose Chainmaille Pliers are purpose-built stubby-jaw pliers designed specifically for working with jump rings and chainmaille. Their exceptionally short, flat jaws keep your hand closer to the work, providing improved control and leverage while requiring less gripping force.

Unlike conventional flat nose pliers, the P547/P747 jaws are engineered to remain parallel around 16–18 AWG jump rings, helping maintain a secure grip without forcing the ring out of the jaws. This specialized geometry makes it easier to open, close, position, and manipulate jump rings while reducing unnecessary pressure on the ring and your hands.

The short jaws also provide greater mechanical advantage, allowing you to work with a lighter grip. This can help reduce marring of jump rings, hand fatigue, and unnecessary stress on the pliers—especially during repetitive chainmaille work.

Choose the P547 with Standard Handle for a compact 4.6" tool, or the P747 with Long Ergonomic Handle for additional reach and a longer handle.

Key Specifications

• Models: P547 / P747
• P547 Handle: Standard
• P747 Handle: Long Ergonomic
• P547 Overall Length: 4.6" (117 mm)
• P747 Overall Length: 5.6" (142 mm)
• Tip Length: 0.45" (11 mm)
• Tip Style: Stubby Flat Nose
• Recommended Aluminum Jump Ring Size: 16 AWG and finer
• Recommended Stainless Steel Jump Ring Size: 18 AWG
• Primary Application: Chainmaille and jump ring work

Features & Benefits

• Purpose-Built for Chainmaille – Designed specifically for opening, closing, gripping, and positioning jump rings.
• Stubby Flat Nose Jaws – Keeps your hand closer to the work for improved control and precision.
• Increased Leverage – Short jaws provide more gripping power with less hand movement and force.
• Parallel Jaw Design – Optimized to remain parallel when gripping 16–18 AWG jump rings.
• Reduced Ring Marring – A secure grip with less force can help minimize marks and deformation on jump rings.
• Less Hand Strain – The specialized design helps eliminate the need for excessive gripping pressure during repetitive work.
• Excellent Jump Ring Control – The jaws are designed to help prevent rings from slipping or being pushed out of the jaws.
• Two Handle Options – Choose between the compact Standard Handle or the longer Ergonomic Handle.
• Professional Jewelry Tool – Ideal for jewelry makers, chainmaille artists, and professional jewelry applications.

P547 vs. P747

P547 – Standard Handle

• Overall Length: 4.6" (117 mm)
• Tip Length: 0.45" (11 mm)
• Standard handle design
• Excellent for close, controlled chainmaille work

P747 – Long Ergonomic Handle

• Overall Length: 5.6" (142 mm)
• Tip Length: 0.45" (11 mm)
• Long ergonomic handle
• Provides additional reach and leverage

Both models feature the same specialized stubby flat nose jaw design. The primary difference is handle length.

Why Use Stubby Chainmaille Pliers?

Traditional pliers can require excessive gripping force when manipulating jump rings. The Tronex stubby design moves your hand closer to the ring and increases mechanical advantage, allowing you to maintain a strong grip with less effort.

The P547/P747 are specifically optimized for 16–18 AWG jump rings, where their parallel jaw geometry helps hold the ring securely instead of allowing it to slip or "spit" out of the jaws.

This makes them particularly useful for chainmaille weaving, jewelry assembly, jump ring manipulation, and repetitive ring-opening and closing tasks.

Recommended Applications

• Chainmaille jewelry
• Jump ring opening and closing
• Bracelet and necklace assembly
• Jewelry making
• Jewelry repair
• Wire jewelry
• Jump ring positioning
• Small-scale metalwork
• Repetitive jewelry assembly

Frequently Asked Questions

What are P547 and P747 pliers used for?

The P547 and P747 are specialized flat nose chainmaille pliers designed for gripping, opening, closing, and positioning jump rings. They are especially useful for chainmaille jewelry and repetitive jump ring work.

What is the difference between the P547 and P747?

The primary difference is the handle. The P547 has a 4.6" Standard Handle, while the P747 has a 5.6" Long Ergonomic Handle. Both use the same 0.45" stubby flat nose jaws.

What size jump rings are these pliers designed for?

The jaws are optimized for 16–18 AWG jump rings. Tronex recommends 16 AWG and finer for aluminum jump rings and 18 AWG stainless steel jump rings.

Why are the jaws so short?

The stubby jaws bring your hand closer to the work and provide increased leverage. This allows you to achieve a secure grip with less gripping force than conventional longer-jaw pliers.

Will these pliers damage or mark jump rings?

The P547/P747 design is intended to help reduce marring by allowing you to maintain a secure grip without excessive pressure. Using a lighter grip is recommended, particularly when working with finished or polished rings.

Are these regular flat nose pliers?

They have a flat nose, but they are specifically engineered as chainmaille pliers. Their short jaws and parallel jaw geometry make them different from conventional flat nose pliers.

Can I use these pliers for other jewelry work?

Yes. While optimized for chainmaille and jump rings, they can also be useful for general jewelry assembly, wire work, and other applications requiring a compact flat gripping surface.

Which should I choose, P547 or P747?

Choose the P547 if you prefer a shorter, more compact standard handle. Choose the P747 if you prefer a longer ergonomic handle with additional reach and leverage.

Are these pliers good for repetitive chainmaille work?

Yes. The stubby-jaw design is particularly beneficial for repetitive jump ring work because it provides greater leverage while reducing the amount of gripping force needed.

Can these replace traditional chainmaille pliers?

They can serve as a specialized alternative to conventional pliers for many jump ring applications. Their greatest advantage is the combination of short jaws, leverage, and parallel gripping geometry for chainmaille work.

These pliers are designed to let you work with jump rings without resorting to the dreaded “death grip.” That excessive grip can mar your rings, cause unnecessary stress and fatigue in your hands, and even put excessive strain on your pliers.

If you’re transitioning from traditional pliers to these, you may need to remind yourself that you don’t have to grip as tightly. Once you retrain your hands to use a lighter grip, you’ll notice the difference. Your hands will thank you, your pliers will thank you, and your finished work will look better as a result.

Oblique-Nosed Chainmaille Pliers

You may have heard these referred to as angled, oblique, or chisel-nosed pliers. To keep things simple, we’ll refer to them as oblique-nosed pliers.

Oblique-nosed pliers offer several important advantages, particularly when working with jump rings and chainmaille. Their angled jaws provide a different approach to gripping and manipulating rings, giving you improved access, control, and leverage in situations where traditional straight-nosed pliers can be difficult to use.

#1. When using two flat-nose pliers, you need to hold them at approximately 180 degrees from one another to achieve the best grip on the jump ring. For most people, this position is uncomfortable and awkward. As a result, you may end up with sore wrists, or you may find yourself unable to get the firm, controlled grip needed to work the ring effectively.

When using oblique-nosed pliers together with flat-nose pliers, your hands naturally fall into a more comfortable and ergonomic position, making it easier to grip and manipulate the jump ring with greater control.

#2. Oblique-nosed pliers can also be flipped over to access tight or hard-to-reach spaces, giving you added versatility without needing to switch to another pair of pliers.